Search Results

Weekend Freedom Machines

Search Results

Your search found 557 posts on 103 pages in 5 topics.

Weekend Freedom Machines

Vintage John Deere Garden Tractor Forum

Doug Nelson -5/24, 4:37 pm- Hello Kurt, Thank you for

Roger Henning -5/24, 2:57 pm- Terry thanks that at leas

Terry Reed -5/24, 8:55 am- Roger, I have been gettin

Roger Henning -5/24, 8:16 am- I got an e-mail this morn

Kurt Vogler -5/24, 5:04 am- Hello Doug I can tell you

Doug Nelson -5/23, 9:04 pm- Mr. Drew, Thank you for

M. Drew -5/23, 2:59 pm- A quart should be plenty.

Doug Nelson -5/23, 11:41 am- Hi Guys, I am planning o

Kurt Vogler -5/23, 7:37 am- Hello Guys I recently stu

Cory Graslie -5/22, 8:10 am- Adam, the 50 cart looks s

Lowell Gates -5/22, 5:53 am- Nice find Adam! ~~ Lo

Chuck Van Dusen -5/21, 10:59 pm- Adam, LOL -- none of the

Adam Vaught -5/21, 9:44 pm- I may eventually Chuck bu

Chuck Van Dusen -5/21, 9:31 pm- Nice score on the 50 cart

Adam Vaught -5/21, 9:16 pm- I joined the 50 cart club

Tony Schroeder -5/21, 7:57 pm- You guys are good. I alr

Roger Henning -5/21, 7:30 pm- Tony the collar works lik

Archive through May 21, 2013

Neil Paku -5/21, 5:52 pm- Tony, slide that collar b

Tony Schroeder -5/21, 5:35 pm- Half of the mower deck pt

Chad Hofmeister -5/21, 3:29 pm- Todd G. - that implement

JRL -5/21, 6:53 am- Thanks for your imput Chu

Jerrel Shell -5/20, 9:07 pm- Thanks Everyone

Roger Henning -5/20, 7:22 pm- Jerrel I think something

Jerrel Shell -5/20, 7:06 pm- I promise I wont bother y

B.A. Babbitt -5/20, 5:51 pm- Jerrel, Click on the yell

Jerrel Shell -5/20, 5:03 pm- I am trying to find out a

Darrin Trussell -5/20, 4:47 pm- Jerrel, In addition to t

Jerrel Shell -5/20, 3:32 pm- Thanks for the info. Is

jonus hutchinson -5/20, 2:57 pm- Jerrel Shell: the mower f

Jerrel Shell -5/20, 11:54 am- A quick follow-up on my l

Jerrel Shell -5/20, 11:44 am- Hello Everyone, I need

Todd Gerdes -5/20, 10:24 am- Hey Scot, No list yet. I

Todd Gerdes -5/20, 10:16 am- Thanks Chuck. The purpose

Scot Gabel ($$) -5/20, 10:12 am- Todd Great job! Now, I ha

Chuck Van Dusen -5/20, 9:35 am- Pretty cool Todd!! Does

Todd Gerdes -5/20, 9:24 am- Thanks guys. It will do

Roger Henning -5/20, 8:54 am- Steve L use the separate

Doug Linton -5/20, 8:45 am- Todd, I would also like t

Adam Vaught -5/20, 6:58 am- Excellent Todd! Very cool

Mike Duwe -5/20, 6:33 am- Todd that is pretty dang

Todd Gerdes -5/20, 5:37 am- Buried some wire for an i

steve Lowe -5/20, 3:54 am- Hi all I have a 65 110

Carl T -5/19, 6:46 pm- Thanks, 2 ply it is

Jeff Kluewer -5/19, 8:24 am- Carl, The 2 ply will be f

Kurt Vogler -5/19, 7:08 am- Kurt We will be in Knoxv

Carl T -5/19, 6:50 am- While on the subject of t

Adam Vaught -5/18, 8:44 pm- Cory, stumbling is right!

Adam Vaught -5/18, 8:43 pm- Lol! Doubt you or I would

Cory Graslie -5/18, 8:42 pm- $20 cultivator. You are p

Terry Reed -5/18, 8:31 pm- Adam, I wish I could find

Adam Vaught -5/18, 8:29 pm- Cory, here is my $20 Cult

Cory Graslie -5/18, 7:41 pm- Adam, nice finds. Share p

Adam Vaught -5/18, 7:39 pm- Thanks Terry! I may need

steve Lowe -5/18, 6:27 pm- Kurt We will be in Knoxvi

Chuck Van Dusen -5/18, 5:42 pm- John, You may want to st

JRL -5/18, 4:45 pm- I have a question for som

Cory Graslie -5/18, 4:06 pm- Adam, I think I saw the s

Terry Reed -5/18, 9:14 am- Congrats, Adam. Nice fin

steve Lowe -5/18, 3:03 am- Sorry Neil we not traveli

Adam Vaught -5/17, 10:01 pm- Picked up another rescue

Scott F. Carmen -5/17, 9:17 pm- steve lowe i have a 66 11

Restoration and Repair Forum

Lawn Tractors and Rear Engine Riders

JOHN DEERE 66

Blake Newell -5/22, 8:23 am- Hello all, I tried the L

Blake Newell -5/22, 11:31 am- I know this is probably t

Roger Henning -5/22, 12:20 pm- Stock was pull start with

Blake Newell -5/22, 4:51 pm- Roger, Thanks first of a

Terry Reed -5/22, 5:26 pm- The 66 had a 6 hp Tecumse

Blake Newell -5/22, 8:34 pm- Terry, Would it be too m

Terry Reed -5/22, 8:38 pm- Blake, I try and remember

70 mower belt

George Bock -5/21, 8:42 am- Having trouble coming up

Tom Ingels -5/21, 9:40 am- George, I think I see why

George Bock -5/21, 12:30 pm- Thanks Tom. The dealer c

Tom Ingels -5/21, 8:13 pm- Youre welcome George. Las

Round Fendered Tractors

Early 1964 Wiring Schematics

Jason Applegate -5/21, 3:05 pm- FYI for anyone wanting to

110 won't start

John Rushmeyer -5/19, 12:32 pm- Jeremy I had somewhat sim

jeremy sensibaugh -5/19, 8:07 pm- Here she is, had a bad gr

Starter/Generator Problem

John Rushmeyer -5/19, 12:40 pm- Thanks Michael. That is

'65 110

John Rushmeyer -5/19, 12:35 pm- Jake Sounds great. I hav

Gear Drive Tractors

Peerless transmission leak

robert d. maynes -5/23, 8:47 am- I am sorry for all the po

robert d. maynes -5/24, 2:02 pm- I am trying to figure out

Jason Rowland -5/24, 2:21 pm- as far as I know, on mine

robert d. maynes -5/24, 6:02 pm- Thanks for your input Jas

110 assistance needed, please!

Tom Schaech -5/19, 7:00 pm- All: I put the tractor o

Dave Dufoe -5/19, 8:06 pm- Tom , this is just my opi

stephen shiery -5/20, 9:09 am- Tom, the secondary belt d

Tom Schaech -5/20, 7:50 pm- Dave/Steve: Thanks so mu

John Johnson -5/21, 7:44 am- Tom, I had the issue with

Tom Schaech -5/21, 6:07 pm- John: Thanks so much!! I

Tom Schaech -5/24, 2:45 pm- All: SUCCESS!!!!! Found

74 110 dies

Mark Fiedeldey -5/23, 7:33 am- I have a 74 110 and it re

Roger Henning -5/23, 7:40 am- I would replace the conde

Mark Fiedeldey -5/23, 9:05 am- Roger, Thanks. You are d

Mark Fiedeldey -5/23, 9:59 am- Roger, I still have to go

Roger Henning -5/23, 2:37 pm- There isnt much room to w

JRL -5/23, 3:34 pm- t is a great tip Roger!

214/110 interchange

Bill ORourke -5/22, 5:10 pm- Going to tear into the va

Tom Ingels -5/22, 5:47 pm- Bill, they are similar bu

Tom Ingels -5/22, 6:12 pm- Bill, I may not have unde

Bill ORourke -5/22, 7:46 pm- Tom... Nope, you didnt m

Peter Sylvester -5/23, 8:55 am- See attached for 200 seri

Leaking axle, at the hubs

led -5/21, 10:03 am- Hello everyone, Its been

Roger Henning -5/21, 7:37 pm- It is easier to drop the

Peter Sylvester -5/22, 10:22 am- I just did my 214 transax

led -5/22, 8:06 pm- Roger and Peter, thanks f

Joseph Unger -5/22, 11:20 pm- led, I used a plastic bag

Peter Sylvester -5/23, 7:50 am- It is recommended to repl

47 Deck Belt Slipping

Rand Graham -5/21, 10:01 pm- Hello all, I am having a

Tom Ingels -5/22, 6:43 am- Heres one thing to look f

Rand Graham -5/22, 6:09 pm- Tom, Thanks. I will pay

JD 110 1972 dead

Douglas Murray -5/21, 5:37 pm- Just started up for the 1

Douglas Murray -5/21, 5:49 pm- Got her running. Removed

Dave Dufoe -5/21, 6:23 pm- Douglas , glad you got it

Douglas Murray -5/21, 6:56 pm- Well.... She died again.

Roger Henning -5/21, 7:39 pm- I would guess more likely

stephen shiery -5/21, 10:33 pm- I agree with Roger. A con

Douglas Murray -5/22, 6:40 am- Thanks. I will try the co

Douglas Murray -5/22, 8:29 am- Oh the pain. Swapped cond

TBorkosky -5/22, 9:22 am- Coil? My 120 would run f

Mark Wengert -5/22, 4:46 pm- My 212 would just up and

212 electric PTO issues

Sean -5/19, 1:12 pm- My PTO seemed to be root

DAVID A CALKINS -5/19, 3:05 pm- Sean,welcome.it could be

stephen shiery -5/20, 9:12 am- Sean, if you turn the PTO

Sean -5/20, 7:21 pm- I found the problem. It

212 dies and will not crank over for 2 minutes.

Jim Heyl -5/17, 9:02 pm- I dont have a wiring diag

Mark Wengert -5/18, 4:48 am- Jim, I found a wiring dia

Vinnie Hueber -5/18, 8:34 am- Make sure the connections

Mark Wengert -5/18, 1:32 pm- Changed the voltage reg a

Roger Henning -5/18, 1:42 pm- Mark float level might be

Mark Wengert -5/19, 7:17 pm- Float had gas in it. Put

Scott F. Carmen -5/19, 7:29 pm- mark i have a tiller and

Mark Wengert -5/20, 4:43 pm- Scott, Im selling the 212

210 w/tiller

Glen Lyall -5/18, 9:22 pm- will Marty called last ni

Hydrostatic Drive Tractors

Onan external coil resister?

Richard Lockwood -5/24, 5:20 pm- I am going to order a Poi

Brought Home a 300

Brian Vold -5/22, 12:28 pm- Sorry took a while to res

Brian Vold -5/22, 12:30 pm- I forgot to mention that

Terry Reed -5/22, 5:11 pm- Moved to proper forum.

Dave Dufoe -5/22, 9:09 pm- Looks very clean , Brian

DBaumann -5/22, 9:12 pm- Looks like it has a newer

Brian Vold -5/23, 8:29 am- I did replace the seat be

Brian Vold -5/23, 8:30 am- The deck is a newer one t

Brian Vold -5/24, 9:29 am- Does anyone know if there

Doug Linton -5/24, 12:00 pm- Is it the head or a bad h

Brian Vold -5/24, 12:55 pm- The head is cracked down

Brian Vold -5/24, 12:56 pm- Sorry 2 inches not 22.

Brian Vold -5/24, 2:36 pm- I guess what I am asking

Vinnie Hueber -5/24, 5:13 pm- I would want to put a goo

Ok I havr 140 H3 transmission issues...maybe?

Scott -5/24, 4:02 pm- This afternoon I had my 1

317 Front Hydraulic Lines?

Bryan W -5/23, 11:06 pm- Hi all ... Ive got the 4

Wayne -5/24, 8:26 am- Bryan, I have a 317 parts

Wayne -5/24, 3:25 pm- Ok, the first one goes fr

The dreaded Onan or Linamar

Army -5/24, 5:33 am- Heres a 2004 Steiner that

Shady -5/24, 9:22 am- Must have come from the w

Jay Smith -5/24, 12:07 pm- The Onans were no better

kevin kramer -5/24, 12:51 pm- I would love to have a St

Blake Newell -5/24, 1:03 pm- I just purchased this 318

Jay Smith -5/24, 2:27 pm- I dont remember the story

420 hauling trailer?

Richard Lockwood -5/21, 5:57 pm- I am planing to buy a tra

Neil Paku -5/21, 6:13 pm- 5x12 would do it easy Ric

Stephen Gensheimer -5/21, 7:45 pm- Hey Guys, Just remember

Adam Vaught -5/21, 9:53 pm- Steve is correct, with a

Michael Nelson -5/21, 10:17 pm- Richard, I would go with

Travis -5/21, 10:27 pm- Watch your axle size as w

Bryan W -5/21, 11:08 pm- I picked up a 420 w/loade

Richard Lockwood -5/22, 6:47 am- Thanks! I will be towing

Lowell Gates -5/22, 7:00 am- This is my 6-1/4 outside

Neil Paku -5/22, 8:53 am- Richard, just put the tra

Travis -5/22, 9:46 am- As Neil said-put on backw

Richard Lockwood -5/22, 10:49 am- Wow! thanks for all the w

Neil Paku -5/22, 10:58 am- Rich, Tractor Supply sell

Travis -5/22, 12:52 pm- Heck-my MC10 Aluma traile

Ed Dorsett -5/22, 1:03 pm- I have been looking for a

Ed Dorsett -5/22, 1:09 pm- I have been looking for a

Ed Dorsett -5/22, 1:09 pm- Darn it!! I double posted

glenn Zeccola -5/22, 2:14 pm- I use my 6x12 single axle

Stephen Gensheimer -5/22, 4:04 pm- Here are a couple of pics

Andrew -5/22, 5:00 pm- Stephen, how did you come

Lowell Gates -5/22, 5:20 pm- Oops! I meant to say my

Stephen Gensheimer -5/22, 6:51 pm- Andrew, Thanks for the c

Roy Fisher -5/22, 8:58 pm- Just to add my two cents.

Ron Geer -5/23, 7:21 am- My 6x12 single axle handl

Richard Lockwood -5/24, 2:18 pm- Thanks so much guys,you w

430 loader and hoe project

Aaron Bauer -5/20, 9:17 pm- Just finished the final t

Michael Nelson -5/20, 9:41 pm- Aaron, Awesome build any

Mike Overbey -5/20, 10:09 pm- Holy schnikes! Thats a g

Adam Vaught -5/20, 10:19 pm- Mind boggling! Incredible

ryan page -5/20, 11:37 pm- Love that front bucket, G

Other Matt -5/21, 8:02 am- Looks pretty rough. Id s

Ron Geer -5/21, 8:39 am- Outstanding work, Aaron!!

Mike Gault -5/21, 10:45 am- Aaron - outstanding craft

Kelly Morrison -5/22, 11:35 am- Wow, what a machine! Sure

keith -5/22, 2:25 pm- Excellent build. I would

Joel Huenink -5/22, 3:41 pm- That is awesome! I want t

Bob Bokan -5/22, 7:29 pm- Really good looking loade

Steve Sunderman -5/22, 8:26 pm- Aaron, I like the grapple

Army -5/23, 3:44 am- Nice work! Very professio

Mike Duwe -5/24, 6:33 am- I could go on for another

Aaron Bauer -5/24, 1:34 pm- Thanks for all the commen

318 Flywheel Screen

B.A. Babbitt -5/21, 12:32 pm- Update: A couple of weeks

Dennis Karst -5/21, 7:18 pm- Sorry but dont know the a

B.A. Babbitt -5/21, 7:43 pm- Engine Spec. # is I10462A

robert kummer -5/21, 7:58 pm- club i have two complete

Kurt Vogler -5/23, 5:48 am- Hello From what I have re

Terry W -5/23, 11:24 pm- Although the parts listin

Hank van Cleef -5/24, 11:46 am- Folks, read the parts man

Quick connect coupler 430

Larry Elswick -5/24, 7:57 am- What style or type are th

Larry Elswick -5/24, 8:09 am- I need the male fittings.

Educated guess on engine hours???

Tony Schroeder -5/21, 8:29 pm- So the 430 I just acquire

Chuck Van Dusen -5/21, 9:24 pm- Tony, If it has the orig

Travis -5/21, 10:37 pm- I wouldnt let the engine

Mike Overbey -5/22, 10:41 am- Tony, I have 2600 on my

Mike Duwe -5/24, 6:36 am- You have no way to tell.

318 running high rpm's

Wade Johnson -5/24, 6:25 am- I have a 1988 318. I have

A gift & a curse 332 restore

Michael Nelson -5/23, 8:40 pm- Chuck, Thanks the images

Ron White -5/23, 9:29 pm- Micheal, I am very happy

Michael Nelson -5/24, 5:32 am- Ron Thanks I might have t

Help for that slow starting 318.

Tim Cummings -5/24, 1:47 am- Saw this on the Wheel Hor

Tom Shively -5/24, 5:10 am- Tim, Thats a good idea. I

322 Hydro pedal , FEL , Backhoe conversion .. finally done !

Jason Anthony -5/23, 10:50 pm- Been awhile since I have

Jason Anthony -5/23, 11:06 pm- [rps20130524_000418_597.j

Jason Anthony -5/23, 11:18 pm- Next was the hydro fluid

318 with 3000 hours--Trade in Value

Dave -5/23, 6:35 am- A neighbor has a 318 with

Wayne -5/23, 6:51 am- Dont trade in, sell outri

Ron White -5/23, 7:19 am- Wayne is correct .... nev

Dave -5/23, 8:01 am- Wayne, Ron,Thanks for the

Army -5/23, 11:00 am- Dealers will lowball like

Steven Ferretti -5/23, 3:37 pm- take the trade for $600 a

Roy Fisher -5/23, 4:21 pm- The trade price is low be

Michael Nelson -5/23, 8:03 pm- Dave, Tell your neighbor

Steven Lewis Nichols -5/23, 8:08 pm- Why would anyone want to

318 safety system problems

Edward F. Preusser -5/22, 12:56 pm- Hi Folks, I have a proble

Chuck Van Dusen -5/22, 8:24 pm- Ed, Something strange th

Edward F. Preusser -5/23, 4:15 pm- Thanks Chuck, It was a fu

318 floods

pat schmitt -5/23, 3:25 pm- when you open the throttl

Repower folks: how many hours do you have?

Mike Hansow -5/19, 11:41 am- I repowered my 1970 140 H

TBorkosky -5/19, 8:35 pm- Mike Hansow, Did you doc

Mike Hansow -5/20, 1:21 am- I posted a few pictures h

Army -5/20, 5:24 am- This thread makes me feel

Mike Overbey -5/20, 10:19 pm- Ive got 225 hrs on my ori

Mike Hansow -5/21, 1:41 am- This thread makes me feel

Army -5/21, 5:14 am- When it comes to repowers

Kurt Vogler -5/23, 6:01 am- Hello I guess I will be w

Army -5/23, 11:07 am- Nothing weird about that

420 will not run smoothly

Brian Emerick -5/22, 5:55 pm- I just wanted to update e

Help with 54" front Blade

Jay Johnson -5/20, 3:28 pm- Both shoe holders that ar

Wayne -5/21, 8:32 am- The tubing used on those

Brian Emerick -5/22, 5:41 pm- I think this is the same

314 With 50" deck question

Scott Schlink -5/21, 5:17 pm- Hey guys, Question for yo

TBorkosky -5/22, 9:13 am- Scott, First thought - A

Scott Schlink -5/22, 11:10 am- The engine is definitely

Jeremy Allen -5/22, 4:25 pm- Scott- The speed-up pulle

60" Mower Gearbox/Pulley Repair?

Bryan W -5/21, 11:05 am- Hi all ... I have a 430/6

Travis -5/21, 11:26 am- A machine shop can cut in

Gary Parsons -5/21, 8:04 pm- Your shaft is probably wo

Bryan W -5/21, 10:53 pm- Travis ... it would have

Travis -5/22, 9:39 am- It likely would need to b

Aaron Bauer -5/22, 10:36 am- Agreed, there really is n

keith -5/22, 2:51 pm- just did the same thing t

318 Honda repower running rich

Jim DAttilio -5/18, 1:58 pm- Hi all, I know that a nu

Roger Henning -5/18, 5:50 pm- Jim my experience with Or

Andre Blanchet -5/19, 7:03 am- Jim, I had problem with p

Tom Shively -5/19, 8:38 am- Jim, The same thing happe

Roger W. Corbitt -5/19, 2:26 pm- Jim, Kind of had the same

Jim DAttilio -5/22, 5:04 am- Thanks Guys, I have been

Pete Rupchock -5/22, 1:11 pm- Have been having same tro

Johnson Loader 12 pics pls

Steven Rempel -5/21, 8:02 pm- I have a JD 140 H3 pre 30

JRL -5/22, 6:43 am- http://www.weekendfreedom

140, <30,000, driveshaft clutch won't release

Jim Verderese -5/21, 8:21 pm- Folks, thanks for the rep

Tom Shively -5/22, 5:07 am- Jim, Glad it all worked o

Installing mule block and mower deck

Dan Heerts -5/21, 3:16 pm- Hey guys..hoping you can

steve van der gracht -5/21, 7:17 pm- Dan, if you are talking a

steve van der gracht -5/21, 7:28 pm- Dan, after reading your p

Justin Wells -5/21, 10:26 pm- I prefer to install the m

318 intake valve issue

Dusty -5/20, 8:51 pm- I have a 318 with the p21

robert kummer -5/21, 8:12 pm- dusty i can sell you a us

Possible 400 purchase

Tim Cummings -5/18, 4:44 am- I think it time for a roa

Terry Reed -5/18, 10:47 am- I found another one, 4 ho

John Unes -5/18, 11:19 am- Poor guy. He looks to be

Terry Reed -5/18, 11:22 am- John, Good eye - I didnt

Army -5/18, 5:06 pm- Ive seen several other H2

Gary Oenning -5/18, 5:10 pm- if you zoom in on the pic

Terry Reed -5/18, 7:33 pm- This one is at a dealer a

Cory Graslie -5/18, 7:52 pm- Terry, that tractor looks

John Unes -5/18, 8:46 pm- Terry Im due west of Pont

bill schwab -5/18, 9:05 pm- You could always recycle

Army -5/19, 5:44 am- Which pic are you zooming

Gary Oenning -5/19, 5:52 am- Army ,i was holding the C

Terry Reed -5/19, 8:37 am- John, Too bad you wasnt c

Gary Oenning -5/19, 10:06 am- Army , did they make two

Gary Oenning -5/19, 10:15 am- disregard that last quest

Terry Reed -5/19, 1:21 pm- So I wonder if replacing

Adam Vaught -5/19, 1:45 pm- I think youll be fine jus

Dave Dufoe -5/19, 2:39 pm- Terry , it sounds like yo

Army -5/19, 6:24 pm- For some reason I wasnt t

Jeremy Allen -5/19, 9:46 pm- Terry, I am 20 minutes s

Terry Reed -5/20, 5:52 am- Jeremy, Its at the JD dea

Terry Reed -5/20, 12:52 pm- Well, that one is gone -

Dan Dillner -5/20, 4:47 pm- Terry, I would sell mine

Dwayne Carpenter -5/20, 8:25 pm- Terry, there are 2 400s

Mike Meyer -5/20, 8:35 pm- When I get the property I

Terry Reed -5/21, 9:20 am- Dwayne, I saw those. Are

Terry Reed -5/21, 10:03 am- I just called about the t

Dwayne Carpenter -5/21, 12:41 pm- Terry, sorry those didnt

Terry Reed -5/21, 6:02 pm- Sorry, Dwayne. I must ha

318 belly screen

Edward F. Preusser -5/21, 1:02 pm- Hi Folks, I would like to

Joe Schleppenbach -5/21, 2:11 pm- 1/2 long 1/4-20 or 3/4 lo

316 Restoration

Darrin Behm -5/21, 11:32 am- Dan That looks really ni

330 Battery light comes on

jason halouska -5/19, 2:21 pm- What should I look for?

Travis -5/19, 2:33 pm- Wires that have rubbed to

jason halouska -5/20, 11:49 pm- I appreciate it Travis, s

Travis -5/21, 11:24 am- You can ohm them out as w

330 adding dual air cleaner

Rick Stuible -5/20, 8:32 pm- I got it on! Took about 2

Mike -5/21, 6:31 am- Rick, mine was actually t

Mike -5/21, 10:42 am- Here is my install.[Final

B43g circa 1984 leaking lots of oil

Michael Nelson -5/21, 5:41 am- Edward, Did you get this

glenn Zeccola -5/21, 9:20 am- Can someone post the part

Jeremy Allen -5/21, 9:42 am- Glenn- The part number of

60" Mower Deck Gear Box Oil ?

Bryan W -5/20, 2:23 pm- Hi all ... Ive got the op

Army -5/20, 3:15 pm- Bryan.. I took all three

Scott Reynolds -5/21, 6:52 am- The screw on the side is

430 transmission / pump

Dusty -5/20, 8:59 pm- Looking to buy a 430 that

Michael Nelson -5/20, 9:48 pm- Dusty, How does the hydro

Dusty -5/20, 10:02 pm- Its been sitting for atle

420 hydraulic line plumbing?

Nick Girard -5/19, 7:41 pm- Anyone have a 420 hydraul

Michael Nelson -5/19, 8:08 pm- Nick, I dont have a 420 b

Nick Girard -5/20, 11:38 am- It was never together, Im

332 Seat Mod

Dean Jones -5/19, 5:38 pm- Well the beer belly aint

david a thompson -5/19, 7:45 pm- Dean what did this board

Dean Jones -5/20, 9:07 am- Its this making beer for

Looking for some parts or a 317

Joe Schleppenbach -5/19, 10:00 pm- Hello all, I have a 317 a

John Unes -5/20, 5:41 am- The company that makes th

JD140-H3 Vanguard 23HP repower - I'm gonna do it.

Mike Hansow -5/19, 12:06 pm- I repowered my 1970 140 H

Shady -5/20, 1:28 am- Hey Mike I really enjoye

Mike Hansow -5/20, 1:35 am- I did post a few pictures

318 starts hard when hot?

mike wenger -5/19, 9:04 am- Hey everyone, I have a re

david a thompson -5/19, 4:46 pm- Mike it sounds like the f

mike wenger -5/19, 9:11 pm- Thanks Dave, I will check

322 no start

Roy Fisher -5/19, 5:10 pm- Seeing as there are alot

Chuck Van Dusen -5/19, 5:46 pm- Roy, When I did this for

Roy Fisher -5/19, 8:39 pm- Well, Im pretty occupied

318 TDC module

John Miller -5/19, 10:53 am- I purchased a 318 to rebu

Terry W -5/19, 11:15 am- Some info in this thread.

John Miller -5/19, 6:15 pm- Terry, Thank you for the

Trouble getting a 430 started

Tony Schroeder -5/18, 4:11 pm- I have a newly acquired 4

Chuck Van Dusen -5/18, 4:28 pm- Tony, Be sure that the f

Tony Schroeder -5/18, 4:39 pm- Thanks Chuck, I will inve

Greg Smith -5/18, 5:01 pm- In addition to what Chuck

Chuck Van Dusen -5/18, 5:15 pm- Tony, The choke looking

Tony Schroeder -5/18, 5:15 pm- Gary, the knob I am seein

Chuck Van Dusen -5/18, 5:23 pm- Tony, Here is a good thr

Gary Forrest -5/18, 5:41 pm- On the 330s the knob is p

Greg Smith -5/18, 5:52 pm- so this is a 432? lol J

Tony Schroeder -5/18, 6:52 pm- OK, It is running now, s

Chuck Van Dusen -5/18, 7:19 pm- Tony, Yes, the 430 origi

Gary Forrest -5/19, 12:33 pm- Tony...what Chuck said...

120 Hydro Rebuild

Randy DeVault -5/19, 10:54 am- I have a few more questio

A 318 Restoration Project Unfold's

Kurt Vogler -5/19, 7:55 am- Hello Ken One thing I for

Metric-not metric?

Tom M -5/19, 7:44 am- Randy, the thing is that

Onan B43 points question

Kurt Vogler -5/19, 7:38 am- Hello Glenn The Points &a

318 Battery Light

Trpshoot -5/17, 8:52 pm- It takes about five secon

Kurt Vogler -5/19, 7:25 am- Hello Trpshoot Your 318 i

420 still has issues

Kevin Schweitz -5/17, 7:58 pm- Thanks Hank, here is the

Eric Heavner -5/19, 12:01 am- Check your coil voltages

420 repair update

Kevin Schweitz -5/18, 6:28 am- Glenn that is awesome, li

glenn Zeccola -5/18, 5:32 pm- Kevin make sure to clean

Kevin Schweitz -5/18, 9:12 pm- Yes forgot to mention I d

300 throttle hookup

Jason -5/18, 11:47 am- Have had my k341 out sinc

General Repair

Odd question, but advice on best rear engine rider

Nate Johnson -5/20, 10:12 am- Hey Guys, I have way to

Roger Henning -5/20, 1:36 pm- Nate your biggest hurdle

Eric Heavner -5/20, 2:18 pm- Heres one http://www.hat

Nate Johnson -5/20, 2:57 pm- Thanks for the info guys!

ryan page -5/20, 11:44 pm- I picked up an old r70, a

Nate Johnson -5/23, 10:58 am- Alright guys, if I am goi

ryan page -5/23, 2:47 pm- Not sure nate, I wish I c

Nate Johnson -5/23, 6:19 pm- Thanks Ryan. I was hopin

Terry Reed -5/23, 8:01 pm- When it comes to the rear

Roger Henning -5/24, 8:27 am- I would agree with Terry

Nate Johnson -5/24, 9:09 am- Thanks for the info guys!

Joe B. -5/24, 2:50 pm- Sounds like a neat projec

Few Nason paint questions

Andre Blanchet -5/24, 8:15 am- Few years ago I bought th

214 wiring diagram

Need help needle bearing rear end shaft.

Brian Champeau -5/23, 7:52 pm- Hello i have a problem,I

Roger Henning -5/24, 8:23 am- I will look it up but I t

K321 carb question

Cory Graslie -5/21, 10:41 am- Question: My new 140 with

Jeremy Allen -5/21, 11:36 am- Cory- For a K321, you are

Dan Marchelle -5/21, 3:05 pm- Cory, I agree that you wa

Adam Vaught -5/21, 9:38 pm- These Kohlers love the fu

Cory Graslie -5/22, 8:13 am- Thanks for the input. I w

Roger Henning -5/22, 12:24 pm- Cory if you find a #30 ma

Cory Graslie -5/22, 12:43 pm- Roger, thanks. I did see

I FOUND AN ONAN GUY!!!

BILL CASEY -5/20, 5:59 am- Hello, Could someone

Roger Henning -5/20, 9:09 am- Bill basically gear drive

I'm stumped

Glen Lyall -5/17, 11:04 pm- Eric On one of the 212 I

John Deere and Allied Attachments

Mulch Kit?

Mike Loftus -5/22, 4:41 pm- Anyone know if the Tri-Cy

Roger Henning -5/22, 6:21 pm- I dont think so but have

Chuck Van Dusen -5/22, 8:09 pm- Mike, The #48 deck as us

Mike Loftus -5/23, 5:57 pm- Thanks for the info Chuck

John Unes -5/24, 5:49 am- Mike, I had the mulching

Mike Loftus -5/24, 5:45 pm- John, I might be interest

Simplicty Powermax Attachments on Deere

Mike Duwe -5/20, 6:31 am- Appears the Powermax is C

Roger Henning -5/20, 9:12 am- Mike most of the time the

Mike Duwe -5/20, 11:34 am- Yup, thats why Im asking.

Cookie Monster -5/24, 5:34 am- Mike, I am currently runn

Mike Duwe -5/24, 6:38 am- Cool. Pictures? I know wh

#33Tiller Lift bar interchange

Max Cech -5/20, 2:41 pm- Hey there guys. I have se

Randy Becker -5/22, 7:51 am- There are only the two li

Max Cech -5/23, 9:41 am- Thanks! Good information

46" vs 48" replacement mowing results

Kurt Vogler -5/23, 6:13 am- Hello Travis I have notic

Travis -5/23, 9:34 am- Kurt-the speed up pulley

Rear Blade

Brian Vold -5/22, 12:47 pm- I decided to post a few p

Terry Reed -5/22, 5:14 pm- Moved to its own stand al

DBaumann -5/22, 9:08 pm- I like that. How wide is

Scott F. Carmen -5/23, 6:24 am- What brand 3 point hitch

Brian Vold -5/23, 8:18 am- DBaumann, the bracket is

Brian Vold -5/23, 8:19 am- Thanks Terry. I still do

Brian Vold -5/23, 8:22 am- Oh, the blade is 44 inch

2000rpm Grooming Mower

Jerrel Shell -5/23, 7:24 am- I know I said no more que

30 tiller vs 33 tiller vs plow

Joseph Wright -5/22, 9:21 pm- Max, One option would be

I give up.....STUMPED!!!!!!!!!!

Tyson Dowding -5/21, 9:24 pm- I have a tilt dump collec

Ron Haass -5/22, 8:15 am- Tyson, Heres one way I tr

M00272X* 60" Mower Deck ...

Bryan W -5/20, 10:30 am- Jeremy ... forgot to say

Insulation size

jerry stone -5/20, 10:00 am- I have a 1984 jd 318 with

30 Hyd Tiller drive pulley

Kurt Vogler -5/19, 8:03 am- Hello Jeremy I had a Very

Mike Overbey -5/19, 3:06 pm- Jeremy, Mine was missing

Jeremy Allen -5/20, 8:07 am- As I said before I had a

Is this a john deere dethatcher?

Aaron Whitley -5/18, 9:57 am- I found this on craigslis

Kenneth W Wyant -5/18, 10:40 am- They were EZ Rakes if you

Kevin Brouse -5/18, 11:59 am- Based on what I see in th

Glen Lyall -5/18, 9:40 pm- you should be able to bol

James E. Plutschak -5/19, 12:57 pm- Aaron, You need this mou

Aaron Whitley -5/19, 10:47 pm- Thanks for the info guys.

#33 Tiller Questions

Dave combs -5/18, 6:18 pm- There should be a square

DBaumann -5/18, 8:23 pm- Thanks a lot Dave. The ti

48 Mechanical Tiller Drive Shaft

Matthew Kreek -5/17, 10:27 pm- Dan, I to once thought my

Dan H -5/18, 9:09 am- Thank you guys, The tract

Dan H -5/18, 9:10 am- It drives me crazy how Jo

John Deere Lawn Tractor and Late Model Garden Tractor For...

Lawn Tractor and Late Model Garden Tractor Forum

Todd Friedman -5/23, 8:41 pm- I am replacing the govern

mark billey -5/18, 7:48 pm- Hello, I have a LT170 tha

Late Model GT Technical Forum

L108 only run full throttle

Hank van Cleef -5/24, 11:34 am- Chad, if the throttle arm

Chad Rowland -5/24, 11:32 am- Thanks Tom! Im soaking it

Tom Ingels -5/24, 11:12 am- Chad, from your first pos

Chad Rowland -5/24, 7:51 am- How do you test/check the

Chad Rowland -5/23, 5:47 pm- It could be? I dont know

Todd Friedman -5/23, 1:57 pm- CHad, I am no expert, b

Chad Rowland -5/23, 9:05 am- Thanks Roger. I will try

Roger Henning -5/22, 6:23 pm- Dont spray it with carb c

Chad Rowland -5/22, 12:35 pm- I brought my friends box

1997 345 dies after 20 minutes of mowing time.

AJ Cannon -5/22, 8:01 pm- I would not have thought

Tom Ingels -5/22, 4:04 pm- I sure didnt think it wou

Roger Henning -5/22, 12:26 pm- Cleaned the hole in the f

Roger Henning -5/22, 7:41 am- AJ I will put it on my to

AJ Cannon -5/21, 8:53 pm- I wonder if one of the co

Tom Ingels -5/21, 8:02 pm- I think you will find a s

Roger Henning -5/21, 7:47 pm- Tom I havent checked ever

Tom Ingels -5/21, 9:25 am- Sounds like the classic b

Roger Henning -5/21, 7:33 am- I dont know much about th

Bent valves

Tom Ingels -5/21, 8:58 am- Stan, Ive heard of a lot

Electrical Questions and Wiring Diagram Request L111

Jeff Jenson -5/18, 8:25 pm- Im looking for a wiring d

Weekend Freedom Machines Classifieds

For Sale...

Mark Wengert -5/24, 6:53 pm- John Deere 212 with a 46i

Kevin Hardwick -5/24, 5:17 pm- Sorry guys, complete hydr

Roger Henning -5/24, 3:06 pm- Nevin you need to add a p

Nevin T. Stas -5/24, 2:47 pm- John Deere 400. 650 origi

Doug Kean -5/24, 1:01 pm- All of the parts listed e

Ben H -5/24, 11:10 am- JD 140 rear PTO is sold p

SWM -5/24, 10:24 am- 1987 John Deere 420,1480

Roger Henning -5/24, 8:33 am- Jason you need to add pri

Jason May -5/24, 8:29 am- Pictures for the ad I jus

Jason May -5/24, 8:24 am- For sale: John deere 110

Doug Kean -5/24, 8:07 am- For Sale: John Deere sus

Blake Newell -5/24, 7:54 am- Selling 54 front blade wi

Ben H -5/23, 10:54 pm- Hydraulic control valve a

andrew kitson -5/23, 10:51 pm- Tru Powers are sold thank

Tim Nicholson -5/23, 10:34 pm- For sale is a john deere

Steven Lewis Nichols -5/23, 8:13 pm- Bolens weights have sold.

Daniel Kissel -5/23, 7:57 pm- For sale, Tecumseh HH60.

Chad Strutzenberg -5/23, 7:48 pm- Electric Lift Side Panel

Ed Cronin -5/23, 3:53 pm- I have a 1979 JD 400 with

David Green -5/23, 3:26 pm- The Hitch I just listed i

David Green -5/23, 2:56 pm- I have for sale a closed

Brian Schnurr -5/23, 11:29 am- #160 mower deck & bra

Daniel Lindstrom -5/23, 9:50 am- [50jd deck.jpg] [jd50bot

Daniel Lindstrom -5/23, 9:47 am- [301.jpg] JOHN DEERE 300

Peter Sylvester -5/23, 9:09 am- [ntn_bearings_reduced.jpg

Tim Nicholson -5/23, 3:45 am- John deere 54 four way bl

Capt. Jack Sparrow -5/22, 7:56 pm- Some new items added to t

Vince Yoder -5/22, 5:50 pm- I have a restored Soil Mo

Mike Overbey -5/22, 2:05 pm- All items in Springfield,

Blake Newell -5/22, 1:31 pm- Selling 54 front blade wi

Matt H -5/22, 9:27 am- All items I listed on: Tu

Tim Jacobson -5/22, 7:12 am- 1984 John Deere 400, with

matt chase -5/22, 7:07 am- does anyone live close en

jake blissett -5/21, 11:16 pm- 200 series parts good mu

loras weber -5/21, 10:45 pm- FOR SALE: Complete Power

jake blissett -5/21, 10:42 pm- Would be interested in a

jake blissett -5/21, 10:41 pm- Model 30 hydraulic tiller

Scott F. Carmen -5/21, 7:11 pm- 2000 rpm PTO for rear of

Tom Gomer -5/21, 6:12 pm- Hey Guys- Have a correcti

Matt H -5/21, 4:11 pm- 318 parts tractor - $600

Brad Thompson -5/21, 11:27 am- Also have a starter off a

Brad Thompson -5/21, 9:58 am- I have some parts from a

Archive through May 20, 2013

Steven Lewis Nichols -5/20, 9:11 pm- I have a pair of 8 cast i

Aaron Stoffa -5/20, 8:44 pm- Tech manual for 316, 318,

Tom Gomer -5/20, 6:45 pm- Hey guys, I got a set of

Travis Shore -5/20, 5:02 pm- 332 for sale in NC Pictu

AJ Cannon -5/20, 1:17 pm- My bagger mount is sold p

Tim -5/20, 7:55 am- 54, 4-way, Hydraulic Snow

AJ Cannon -5/20, 5:52 am- I am going to re list thi

Todd Dowler -5/20, 1:32 am- Buford Bucket for a 318/3

Daniel Lindstrom -5/19, 8:09 pm- [50jd deck.jpg] [jdtag.j

Andrew -5/19, 11:52 am- - 2 speed locking rearend

Travis Shore -5/19, 10:46 am- 332 for sale in NC I hav

Gary Dallman -5/19, 10:08 am- 318 is sold thanks

Robert Bell -5/18, 8:44 pm- 1967 112 lower serial num

Gary Dallman -5/18, 8:33 pm- john deere 318 with p218

Vince Yoder -5/18, 8:56 am- I have a restored Soil Mo

Ben H -5/17, 11:59 pm- John Deere hood part # AM

Tyler J. Hartman -5/17, 10:03 pm- For sale, John Deere 317.

james wasiowicz -5/17, 9:49 pm- Hello,still have the 1974

Wanted To Buy...

Bob Pavelock -5/24, 6:48 pm- Need one or a pair of rea

Edward H. Lincoln -5/24, 12:07 am- Need a right side axle fo

Barry Weiss -5/23, 9:43 pm- Looking for an outside hy

Marvin Halvorsen -5/23, 8:36 pm- Found a good 140 hood. th

PETE DAVIS -5/23, 9:03 am- lOOKING FOR A JOHN DEERE

Bob Pavelock -5/23, 8:18 am- Looking for front turf wh

Bob Pavelock -5/23, 8:17 am- Looking for john Deere #7

Glen -5/23, 7:55 am- Looking for the manual an

Tony Schroeder -5/22, 2:24 pm- I have found a nose and a

Cory Graslie -5/22, 8:18 am- Gentlemen and ladies if a

Ben Johnson -5/21, 11:10 pm- Low hour late model 455,

david a thompson -5/21, 11:08 pm- Looking for a p218 rebuil

Jerrel Shell -5/21, 8:47 pm- Looking for a Front Yoke

Glen Motes -5/21, 7:47 pm- looking for a 200 series

John Johnson -5/21, 7:49 am- Looking for weight box fo

Mike Peery -5/21, 1:10 am- Hello, I am looking for a

Kevin McWilliams -5/20, 7:23 pm- Looking for a 110 round f

Cliff Harms -5/20, 4:07 pm- Looking for left side not

Jake Hughes -5/20, 9:06 am- Morning Folks - Looking

Jeff Rolin -5/20, 8:13 am- Looking for an engine or

Tony Schroeder -5/20, 7:59 am- Looking for a good 430 ho

Jeremy Allen -5/20, 7:55 am- I am looking for a 3 pt m

Joe Schleppenbach -5/19, 10:09 pm- Hello, I have a 317 and I

Kyle Adams -5/19, 9:27 pm- Looking for a front grill

Scott Warren -5/19, 9:00 pm- Looking for two extension

Tony Schroeder -5/19, 6:01 pm- Looking for a 430 nose co

pat schmitt -5/19, 3:50 pm- want the fan that is on t

Jim Briney -5/19, 3:05 pm- 116H parts.... Need a bu

Gary Dallman -5/19, 10:11 am- looking for a set of spin

Jimmy keenan -5/18, 7:48 pm- Looking for a 318 working

Move It!...

Enclosed Hauling Here - Latest Routes !

Jim J -5/24, 4:44 pm- Need enclosed tractor - a

Jim J -5/22, 8:39 pm- May 28th Enclosed tran

Jim J -5/18, 4:28 pm- May 22nd Available for

Upcoming Events - Calendar

Weekend of Freedom Machines, 50 Years of Mowing

Steven Abel -5/23, 5:11 pm- Just over 2 months to go

Brodhead / Little G

Kris Hanson -5/22, 5:06 pm- Thanks

Mike Meyer -5/20, 8:37 pm- Kris, Im pretty sure tha

Western NY Spring Plow Day May 11, 2013

Ron White -5/21, 7:21 pm- Hello Dan, I would like

Dan VanDelinder -5/21, 2:52 pm- Sorry for the delay- but

NY STATE 2 CylinderI Expo XI July 11-13 2013

Casey D. Rohr -5/20, 11:11 am- i will bringing the 110rf

Scott F. Carmen -5/19, 7:32 pm- is there a swap meet area

James R Snyder -5/18, 7:40 pm- I will definitely be ther

Farm Equipment Show, Trenton MO June 14-15th, 2013

Lowell Gates -5/18, 4:21 pm- There will be a Farm &

Administration Log Out