| Author |
Message |
    
Daniel Lindstrom
Member
Username: Iowa1972jd140
IA
Registered: 8-2012
Post Number: 26
| | Posted on Sunday, May 19, 2013 - 8:09 pm: | 
|
JOHN DEERE 140,300,312,314,316,317,318,322,330,332 MOWER DECK 50 INCH
DECK IS SOLID BEARINGS ARE TIGHT IN GREAT SHAPE
$625.00 CENTRAL IOWA
515-460-0772 |
Andrew
Member
Username: Andrewn
Ia
Registered: 7-2010
Post Number: 391
| | Posted on Sunday, May 19, 2013 - 11:52 am: |
|
- 2 speed locking rearend out of 89 430 - $350
- H3 setup out of same tractor - $175
- 5 port power steering column - $125
- Steering cylinder off 430 - $125
- Ignition coil for B series Onan engine - $30
- OEM rockshaft (not 3 point) - $25
- Rockshaft cylinders for open frame tractors - $75 each
- Headlight harness - $10
- Deck lift straps for 300 series - $25 per pair
- Deck lift straps for 400 series - $35 per pair
- OEM steering wheel off 318 - $25
- Check valves for 300 and 400 series hydro tractors - $60 per pair
ALL PRICES ARE NEGOTIABLE - FEEL FREE TO MAKE OFFERS!
Pics available upon request.
All parts located in Altoona,Ia. Shipping available on everything.
Paypal for shipped items. Cash/Credit Card for items picked up.
BigDriver010@gmail.com |
Travis Shore
Member
Username: Ssilver07
NC
Registered: 9-2011
Post Number: 3
| | Posted on Sunday, May 19, 2013 - 10:46 am: |
|
332 for sale in NC
I have a John Deere 332 with the yanmar diesel for sale. It currently has 1071 hours. It has been completely gone through and every nut and bolt checked. The engine was compression checked and pump flow checked. Wiring harness checked and ohmed for any potential problems. Hydraulic system flushed and pressure tested with spool valve disassembled and cleaned, o-rings replaced. Anything that was showing any wear or even looked as if it could fail was replaced with genuine John Deere parts. There was nothing left unattended on this little tractor. It is currently sitting on oversized true power bar tires in the rear and oversized rib tires in the front.They are 26x12x12 and 18x8.50x8. Rear tires are loaded with John Deere fluid. I also have a new in the box set of rear wheel weights, a 54" hydraulic 4-way blade for the front and a 46'' mowing deck with mule drive. I know Im leaving out a lot of details because I simply can't remember them all. I can get more detailed pictures of any portion of the tractor for serious buyers. Thanks
Asking $3995, No Trades
You can PM me but I prefer phone calls-- 336-244-three three five three
Pictures can be seen here---
http://winstonsalem.craigslist.org/grd/3813473470.html |
Gary Dallman
Member
Username: Rookie
SD
Registered: 8-2004
Post Number: 161
| | Posted on Sunday, May 19, 2013 - 10:08 am: |
|
318 is sold thanks |
Robert Bell
Member
Username: Rwbell47
IN
Registered: 9-2008
Post Number: 87
| | Posted on Saturday, May 18, 2013 - 8:44 pm: |
|
1967 112 lower serial number (below 5500) Does not currently run. It will only turn over if you jump the soleiniod and it doesn't have spark. I haven't really messed with it other than putting a battery in it to see if it will fire. Its missing the drive belt shield and the top of the air cleaner. Also the front tires go flat. Has a few welds and repairs on the deck. But the deck does turn freely.
$275
Located in CenterPoint, In. About an hour west of Indy.
call or text for fastest response 812-243-6503
 |
Gary Dallman
Member
Username: Rookie
SD
Registered: 8-2004
Post Number: 160
| | Posted on Saturday, May 18, 2013 - 8:33 pm: |
|
john deere 318 with p218 motor newer starter lately shows 732 hours 1000.00 in south Dakota 320 267 8517 also have mule drive for 175.00 and a 50 inch deck needs spindles otherwise ok shape 150.00 |
Vince Yoder
Member
Username: Vinceky
IA
Registered: 9-2008
Post Number: 96
| | Posted on Saturday, May 18, 2013 - 8:56 am: |
|
I have a restored Soil Mover Mini Scraper for sale. It was blasted and repainted. It also has the serial tag #122 and the front gate that aren't shown in the picture. I also have pictures from before the restoration. Asking 5,250.
I also have a John Deere 110 four wheel drive for sale. This was custom built with two 110 tractors and two Case hydraulic drive rear ends. There are two hydraulic remotes front and rear and a separate remote for the three point. This also has power steering from a 318 which works great. I also have many build pictures for this if you are interested. There is one wheel weight on each wheel and all tires are new. Asking 5,500.
Email in profile or call 319-683-3182. |
Ben H
Member
Username: 4xfourfun
IL
Registered: 10-2012
Post Number: 8
| | Posted on Friday, May 17, 2013 - 11:59 pm: |
|
John Deere hood part # AM35119 (shows it subs to AM36454, both NLA)
Appears to be NOS and never installed, has some light storage scuffs but mounting bolts and hole for hood catch have never been used. Box is very worn as you can see. $50
Located just 30 minutes NE of St Louis MO. Feel free to call or text for fastest response
6 one 8
5 five 8
3 seven 8 five
 |
Tyler J. Hartman
Member
Username: Tyler_hartman
IN
Registered: 4-2009
Post Number: 144
| | Posted on Friday, May 17, 2013 - 10:03 pm: |
|
For sale, John Deere 317. Runs and drives but needs TLC. Asking 400 obo
Located in Valparaiso Indiana 46385
Thanks Tyler
Call 219-916-2114 for info can email pictures if interested |
james wasiowicz
Member
Username: Jw332
fl
Registered: 1-2013
Post Number: 41
| | Posted on Friday, May 17, 2013 - 9:49 pm: |
|
Hello,still have the 1974 140 h-3 with 3 pt and 1971 h-3 and 140 sleve hitch .Would make package deal for the both of them.can e-mail pic's .thanks James |
Rustynuts
Member
Username: R_taylor
NH
Registered: 1-2013
Post Number: 4
| | Posted on Friday, May 17, 2013 - 1:54 pm: |
|
My Power Flow bagger has been sold. Thanks to everyone who responded. |
matt morrow
Member
Username: Kydeere
KY
Registered: 5-2012
Post Number: 22
| | Posted on Friday, May 17, 2013 - 12:31 pm: |
|
John deere tiller supposed too fit a 140 or a 300 series. What you see is what you get it's all I got. All take 250 or Obo! And locate in northern ky. Call or text for more info 502-682-9103
 
(Message edited by treed on May 17, 2013) |
chad schreiber
Member
Username: Chad_s
pa
Registered: 7-2009
Post Number: 64
| | Posted on Friday, May 17, 2013 - 11:45 am: |
|
Price reduced on 4x5 series cab. $400 obo. Pick up or can maybe help with delivery. email or call 717-598-2538. Thanks
 |
Bob Colebank
Member
Username: Rco2120
MN
Registered: 1-2008
Post Number: 34
| | Posted on Friday, May 17, 2013 - 9:15 am: |
|
I HAVE A NICE #44 LOADER FOR SALE FOR 318/322/332 MODELS. EXCELLENT CUTTING EDGE ON BUCKET, NO WELDS OR REPAIRS, INCLUDES PARKING STANDS. NEAR ROGERS, MN. PRICE $2650 CAN EMAIL PICS.... |
Tony Riecken
Member
Username: Zztop99
NE
Registered: 1-2011
Post Number: 3
| | Posted on Friday, May 17, 2013 - 9:05 am: |
|
Hello Rustynuts i would like to purchase your bagger Posted on Wednesday, May 15, 2013 - 9:22 am:
Power Flow bagger for sale $250.
Please contact me at tony@vulcanindustries.com
402-720-2428 |
Chris Sawyer
Member
Username: Sawyer
Ia
Registered: 4-2010
Post Number: 189
| | Posted on Thursday, May 16, 2013 - 9:22 pm: |
|
ORIGINAL 1970 Spruce Blue Patio 112 manual lift with deck and rear weights.Runs great.Seat does have a couple small tears and hood is nice and original as well.Kohler engine and original 38 deck.asking $1300 OBO.Tractor is located in Montour,Iowa and I will be in Horicon this July for the John Deere 50th celebration.Please email me at csawyer@iowatelecom.net for pics or call Chris at 641-750-3638. |
david a thompson
Member
Username: Dave_thompson
sc
Registered: 8-2011
Post Number: 156
| | Posted on Thursday, May 16, 2013 - 8:53 pm: |
|
My 1990 318 tractor deck and 44 loader for sale 5500.wont find a better one text me for info at 803 622 2714 dave |
david a thompson
Member
Username: Dave_thompson
sc
Registered: 8-2011
Post Number: 155
| | Posted on Thursday, May 16, 2013 - 8:45 pm: |
|
For sale is my 1990 318 that I bought new with 3 point hitch and 48 inch deck and 44 loader this tractor has a little over 800 orig. hours has 26x 12x14 bar tires(new) on rear 5 ribs on front tractor needs nothing and never did just need some room in my shop never any leaks always used amsoil fluids and grease . I want 5500.00 and will help with delivering from soith Carolina we don't know what rust is down here text me at 803 622 2714. Dave |
Blake Newell
Member
Username: Blakenewell
IL
Registered: 6-2012
Post Number: 162
| | Posted on Thursday, May 16, 2013 - 10:50 am: |
|
-Selling my 1983 John Deere 318 and deck. Would like to get $1650 for it. Decent shape. i just replaced oil pan, put new pan gasket on it, new points, new air, fuel, and oil filters, I put a oil drain tube to make oil changes easier than believeable. Probably one of the more proud moments in my life coming up with the oil drain idea. Can email pics upon request. Has the original B43G engine. Well Original as far as I know. I do know this one had the B43G originally, dont know if this was in fact the one that was in it. Doesnt smoke runs really well.
-Also, would like to sell my 116, dont know the year of this one. Runs well, but not perfectly, everything works to my knowledge. Could use a carb cleaning. Brand new mechanical fuel pump and all filters changed- air,and fuel and oil just changed. Comes with brand new set of blades. Would like to get $450 out of it. It does run well, but needs to have the choke on for a little while on start up, carb cleaning would hopefully help that. Pics upon request.
-Please contact me by texting/calling (309)238-4363 or emailing me at deereboy1@gmail.com
Thank you,
Blake
Finally got the 318 pictures up with the exception of the deck, which is not in the pics....the 116 is in an earlier post.
 |
tom hayes
Member
Username: Anime187
ohio
Registered: 4-2009
Post Number: 506
| | Posted on Thursday, May 16, 2013 - 10:01 am: |
|
sorry forgot price of 2250obo |
tom hayes
Member
Username: Anime187
ohio
Registered: 4-2009
Post Number: 505
| | Posted on Thursday, May 16, 2013 - 10:01 am: |
|
posting for a lady
1986 John Deere 316 Tractor comes with 3 point hitch, belly mower, seeder, tire chains and snow blower. Runs great!! For additional information contact me at 419-890-2771
 |
Ben Johnson
Member
Username: Bj140
IA
Registered: 12-2002
Post Number: 327
| | Posted on Thursday, May 16, 2013 - 9:51 am: |
|
44 loader sold pending payment and pick up
Thanks Ben |
Warren Burke
Member
Username: Burke2w
TN
Registered: 6-2006
Post Number: 551
| | Posted on Thursday, May 16, 2013 - 9:34 am: |
|
318 I listed on 5/14/13, still for sale.
Thanks,
Warren
burke2w@aol.com
423-650-eight nine six zero - call or text, if that is easier |
AJ Cannon
Member
Username: Ajcan
Ga
Registered: 1-2004
Post Number: 3355
| | Posted on Thursday, May 16, 2013 - 9:07 am: |
|
I have an MCS/bagger bracket removed from a 445.
It has the correct hole pattern to mount to a 318 through 430 but would need to be trimmed to fit.
I am sure it will fit many other models as well.Has been welded in one spot but it looks like a clean weld.
$65.00 shipped anywhere in the lower 48.
If you have more questions or need more pictures just fire away.
AJ
  |
Jim Buske
Member
Username: Jim
ND
Registered: 2-2002
Post Number: 136
| | Posted on Thursday, May 16, 2013 - 8:34 am: |
|
HD air cleaner for 140/120. Hose is on the stiff side. Original except remanufactured carb adapter. $465.00. Includes shipping. weasd99@yahoo.com  |
Doug Kean
Member
Username: Atvrder300
Il
Registered: 10-2004
Post Number: 484
| | Posted on Thursday, May 16, 2013 - 6:55 am: |
|
For Sale: John Deere 542 A front PTO Should fit 140 and all 300 series tractors. I have owned this for over 10 years and only had it on a tractor once. Includes bolt on pulley for both style front clutches as well as both pullies for either onan/kohler motors or Yanmar motors. The spin at different RPM so there are different pullies to make the 540 rotation. Also includes three different sized belts for different tractors. Asking $400.00 Please call 309-221-6734
420 Belly pan guard. Good shape only one small hole. Asking $40.00
 |
jake blissett
Member
Username: 7mag
ky
Registered: 4-2009
Post Number: 107
| | Posted on Thursday, May 16, 2013 - 4:13 am: |
|
John Deere model 30 hydraulic tiller. New tines . 3 point hitch bracket . Belly pump setup . With 12" extension making it 42" total. $1250 Jake 502-345-6309 |
jake blissett
Member
Username: 7mag
ky
Registered: 4-2009
Post Number: 106
| | Posted on Thursday, May 16, 2013 - 4:09 am: |
|
140 fender deck isolators . New in bag . $20 shipped. Jake 502-345-6309 |
jake blissett
Member
Username: 7mag
ky
Registered: 4-2009
Post Number: 105
| | Posted on Thursday, May 16, 2013 - 3:36 am: |
|
Air cleaner assembly from Kohler 317 . The kind used to make HD air cleaner for 110 112 140 tractors. Good shape $25 shipped. Jake 502-345-6309 |
Tom S
Member
Username: Spacemanspiff
WI
Registered: 9-2011
Post Number: 3
| | Posted on Wednesday, May 15, 2013 - 11:07 pm: |
|
Brinly 3 point plow. Works great behind a 3xx or 4xx series tractor. Has cutter and gauge wheel, $300. Available in SE Wisconsin (Burlington area). Email platinum_jello@hotmail.com
 |
Daniel Lindstrom
Member
Username: Iowa1972jd140
IA
Registered: 8-2012
Post Number: 22
| | Posted on Wednesday, May 15, 2013 - 9:39 pm: |
|
46 Mower Deck Is SOLD |
Ben Johnson
Member
Username: Bj140
IA
Registered: 12-2002
Post Number: 326
| | Posted on Wednesday, May 15, 2013 - 8:01 pm: |
|
For sale 44 loader for 300 series. Complete with grill guard. And manual. Very nice condition. Comes with parking stands.
Asking 2500 or best offer
Just west of Iowa city ia
Can deliver to Horicon show
Thanks Ben 319-631-3842 |
Dan H
Member
Username: Dan318
Ohio
Registered: 1-2011
Post Number: 376
| | Posted on Wednesday, May 15, 2013 - 5:47 pm: |
|
-For Sale-
-50 decks for 316 318 322 300 and 332 garden tractors. $750 OBO each
-46 deck with 2 bag bagger for 316 318 322 300 and 332 garden tractors. Complete. $850 OBO
-PowerPak motor for collection systems, Motor bad, whole $50 OBO or to be parted out
-PowerPak gas tank $20 OBO
-60 inch MCS boot, used, $20 OBO
-50 inch MCS boot, used, $20 OBO
-46 deck grass deflector chutes $25 - $50 OBO
-420 grill $55 OBO
-420 drive shaft $55 OBO
-Quick Hitch Blade $260 OBO
-Quick Hitch for 316 318 322 300 and 332 garden tractors $500 OBO
-60 inch deck for John Deere 400 garden tractor, nice, $800 OBO
-60 inch deck drive shaft for John Deere 400 garden tractor $200 OBO
-30 inch hydraulic tillers 316 318 322 300 332 420 and 430 garden tractors , 1 with extension, $1000 - $1500 OBO
-80 dump cart $250 OBO
-8-horsepower Kohler K181 Motor Tins / Engine Covers $20 OBO
-Brinley single bottom plow $325 OBO
-54 dual blade for 140 300 316 317 318 322 and 332 garden tractors. $550 OBO
-49 snow blowers 120 140 300 312 314 316 317 318 322 and 332 garden tractors.$400 - $700 OBO
-50 inch snow blower for John Deere 400 garden tractor $800 OBO
-Complete 400 to be parted out, email with needs
-Complete 316's (Onan) and 318's to be parted out, email with needs
-Complete 314 to be parted out, email with needs
Accepting any offers. PayPal, cash or money orders. Pickup in Akron Ohio 44319 or I will try to ship anything, buyers pay all shipping costs. Will trade (especially for a 48 mechanical tiller drive shaft). No delivery. Pictures can be sent through email or just look around. Posted for sale elsewhere also. Thanks! |
Blake Newell
Member
Username: Blakenewell
IL
Registered: 6-2012
Post Number: 161
| | Posted on Wednesday, May 15, 2013 - 4:20 pm: |
|
Need to make room-
-Selling my 1983 John Deere 318. Would like to get $1700 for it. Decent shape. i just replaced oil pan, put new pan gasket on it, new points, new air, fuel, and oil filters, I put a oil drain tube to make oil changes easier than believeable. Probably one of the more proud moments in my life coming up with the oil drain idea. Can email pics upon request. Has the original B43G engine. Well Original as far as I know. I do know this one had the B43G originally, dont know if this was in fact the one that was in it. Doesnt smoke runs really well.
-Also, would like to sell my 116, dont know the year of this one. Runs well, but not perfectly, everything works to my knowledge. Could use a carb cleaning. Brand new mechanical fuel pump and all filters changed- air,and fuel and oil just changed. Comes with brand new set of blades. Would like to get $450 out of it. It does run well, but needs to have the choke on for a little while on start up, carb cleaning would hopefully help that. Pics upon request.
-Please contact me by texting/calling (309)238-4363 or emailing me at deereboy1@gmail.com
Thank you,
Blake
Think I got some pics of the 116 to load finally. I will keep trying with my 318.
  |
Matt H
Member
Username: Harbertm
IA
Registered: 12-2008
Post Number: 1251
| | Posted on Wednesday, May 15, 2013 - 4:10 pm: |
|
Tiller listed this morning is no longer available.
I have a new shipment of seat suspensions if there is interest. $325
Thank you,
~Matt
515-421-3136 |
Fred Sohm
Member
Username: 428_pi
IA
Registered: 12-2010
Post Number: 156
| | Posted on Wednesday, May 15, 2013 - 2:19 pm: |
|
For sale: 1996 425 all wheel steer with 54 inch mower deck. 1388 one owner hours, steel cam gear update done, very sharp and fully serviced, new seat too. In nw Iowa. Asking 3500.00 obo.call or text me at 712 880 1466. Will text pictures. No emails please. Thanks, Fred |
Rustynuts
Member
Username: R_taylor
NH
Registered: 1-2013
Post Number: 3
| | Posted on Wednesday, May 15, 2013 - 9:22 am: |
|
Power Flow bagger for sale $250.
I believe this to a complete set up off a 50” deck. The blower turns freely and the pulleys seem tight.
I do have the mounting brackets and double pulley setup that goes with it. The bags are patched but
Useable. The model number on the blower housing in M00PFCC xxxx.
It is located in New Hampshire, shipping would be awkward and Likely expensive.
Contact me for more information.
OleTaylor @comcast.net
 |
Daniel Lindstrom
Member
Username: Iowa1972jd140
IA
Registered: 8-2012
Post Number: 21
| | Posted on Wednesday, May 15, 2013 - 7:28 am: |
|
JOHN DEERE 140,300,312,314,316,317,318,322,330,332 YOU MAY HAVE TO SWAP THE DRAFT ARMS TO FIT ON 140-317 MOWER DECK 46 INCH. DECK IS SOLID NO RUST,WELDS, CRACKS. BEARINGS ARE TIGHT, BELT IS GOOD.
$325.00 O.B.O.
515-460-0772
Central Iowa |
Matt H
Member
Username: Harbertm
IA
Registered: 12-2008
Post Number: 1250
| | Posted on Wednesday, May 15, 2013 - 12:34 am: |
|
3xx series 42" hydraulic tiller. Tiller includes rock shaft mounts and hitch plate mounts. This is a belly pump driven model that uses your mule drive and mower deck belt (not included). Pump mount included.
I haven't used it more than 30 minutes but it works well and you may test it out if you'd like before purchase. $850 will ship if buyer handles fees.
Colin asked me to state that the 322 pictures is not for sale.. But if it was ever to be sold, (Sawhill), I call first dibs. 
Location 50023 |
andrew kitson
Member
Username: Kitson82
IL
Registered: 10-2007
Post Number: 123
| | Posted on Tuesday, May 14, 2013 - 10:33 pm: |
|
For sale:
double notch cast wheel weights 140 +shipping
300 series mule drive 40 +shipping |
Closed: New threads not accepted on this page
