Weekend Freedom Machines


 

Topics Topics Edit Profile Profile Help/Instructions Help Member List Member List Register for Account Register for Account  
Search Last 1|3|7 Days Search Search Tree View Tree View Clipart Clipart  

Wanted To Buy...

Weekend Freedom Machines » Weekend Freedom Machines Classifieds » Wanted To Buy « Previous Next »

  Thread Last Poster Posts Pages Last Post
Archive through June 19, 2010Tom Maynard48 1 6-19-10  4:08 pm
Archive through June 27, 2010Larry Dudley48 1 6-27-10  9:52 am
Archive through July 04, 2010Chad Longo48 1 7-04-10  2:24 pm
Archive through July 11, 2010Marty Oswald48 1 7-11-10  7:09 am
Archive through July 19, 2010Roger Henning48 1 7-19-10  8:06 pm
Archive through July 26, 2010Roger Henning48 1 7-26-10  9:38 pm
Archive through July 31, 2010Scott F. Carmen48 1 7-31-10  9:36 pm
Archive through August 09, 2010Steven Lieberenz48 1 8-09-10  9:00 am
Archive through August 16, 2010Herb Webber48 1 8-16-10  6:26 am
Archive through August 23, 2010Eddie Collins48 1 8-23-10  1:01 pm
Archive through August 28, 2010John Underwood48 1 8-28-10  9:05 pm
Archive through September 03, 2010Don Brookshire48 1 9-03-10  9:05 am
  ClosedClosed: New threads not accepted on this page        

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

William Broderick
Member
Username: W_broderick
NY
Registered: 6-2009
Post Number: 18
Posted on Wednesday, September 08, 2010 - 9:18 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
I am looking for the ignitor also called ign. control for a 425 if anyone is parting one out. Thanks! Bill call (518)279-3020
Top of pagePrevious messageNext messageBottom of page Link to this message

David Hasselman
Member
Username: H_e_p
MO
Registered: 10-2009
Post Number: 31
Posted on Wednesday, September 08, 2010 - 4:34 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
Looking for belt shield for 140 with 46" deck. I believe the Deere part numbers are: AM33686 (LH) and M42282 (RH)
Contact info in profile
Thanks
David
Top of pagePrevious messageNext messageBottom of page Link to this message

david thewes
Member
Username: Jdmaninlouky
ky
Registered: 8-2010
Post Number: 2
Posted on Wednesday, September 08, 2010 - 4:17 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
kyle-Thanx for your purchase of my items,hope and I'm pretty sure you'll be very happy with them.UPS says'to expect delivery on Thurs.Dave
Top of pagePrevious messageNext messageBottom of page Link to this message

Justin Jeske
Member
Username: Ssg112
WI
Registered: 5-2010
Post Number: 16
Posted on Wednesday, September 08, 2010 - 8:48 am:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
Thanks! I have found a bagging solution for my 212. Thanks for all the responses.
Top of pagePrevious messageNext messageBottom of page Link to this message

Mike Morris
Member
Username: Pgawanab69
OH
Registered: 1-2010
Post Number: 36
Posted on Wednesday, September 08, 2010 - 6:26 am:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
No longer looking for a engine for a 140 - now looking for a transmission for my truck...

Mike
Top of pagePrevious messageNext messageBottom of page Link to this message

Nick Holmes
Member
Username: Corvettedion
IA
Registered: 5-2007
Post Number: 345
Posted on Tuesday, September 07, 2010 - 11:10 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
Hi guys, i ended up welding a new ball end on my steering ram for my grand dad's 318 so i don't need one now. would have rather replaced it but gotta keep the project moving so i can head south at a decent time on thursday.

nick
Top of pagePrevious messageNext messageBottom of page Link to this message

Andrew
Member
Username: Andrewn
Ia
Registered: 7-2010
Post Number: 33
Posted on Tuesday, September 07, 2010 - 8:16 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
I'm still looking for a water pump for my 322.

Part number - AM875008.

AM878167 for a 332 is the same thing and will work. For some reason it gets a different number on the diesel version.

New or used is ok but if it's used I would like to know it works without leaks. I'm not interested in untested used parts in unknown condition.

Thanks guys.
Andrew

Bigdriver010@gmail.com or 515-202-6067
Top of pagePrevious messageNext messageBottom of page Link to this message

Mike Morris
Member
Username: Pgawanab69
OH
Registered: 1-2010
Post Number: 35
Posted on Tuesday, September 07, 2010 - 3:56 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
Looking for an engine for a 69 140 H3 - would prefer a runner but something needing some work isn't out of the question. Somewhere within a few hours from Greenville, OH (45331).

Thanks,
Mike
pgawanab69@gmail.com
Top of pagePrevious messageNext messageBottom of page Link to this message

Andrew Goin
Member
Username: Andrewgoingmailcom
NY
Registered: 5-2010
Post Number: 17
Posted on Tuesday, September 07, 2010 - 1:54 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
Hello,

I need steering parts for my 1984-316. I'm looking for the shaft with the u-joints at either end that couples the gearbox with the steering column. Can anyone help? I'm outside of Rochester, NY.

Andy
Top of pagePrevious messageNext messageBottom of page Link to this message

Keith V
Member
Username: Echos67
Md
Registered: 9-2009
Post Number: 116
Posted on Tuesday, September 07, 2010 - 12:31 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
Items found from my post on September 5th, thank you for the responses
Keith
Top of pagePrevious messageNext messageBottom of page Link to this message

Jeremy Allen
Member
Username: Deereman84
IL
Registered: 8-2010
Post Number: 6
Posted on Tuesday, September 07, 2010 - 8:58 am:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
I would like to thank everyone who responded to my want add for the helper springs on Aug. 31. I have both helper springs now. Thanks everyone.
Top of pagePrevious messageNext messageBottom of page Link to this message

Justin Jeske
Member
Username: Ssg112
WI
Registered: 5-2010
Post Number: 15
Posted on Monday, September 06, 2010 - 9:55 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
I'm looking for a bagger for a 212. Any help would be great. Thanks! Please email @ jjesketrucking@gmail.com
Top of pagePrevious messageNext messageBottom of page Link to this message

Nick Holmes
Member
Username: Corvettedion
IA
Registered: 5-2007
Post Number: 344
Posted on Monday, September 06, 2010 - 9:36 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
Need a steering ram for a 318 asap. gotta take the tractor to missouri on thursday night but found it had a broken ram.

nholmes@tworiversins.com or 515-491-4137

thanks
nick
Top of pagePrevious messageNext messageBottom of page Link to this message

Paul Allen
Member
Username: Pinbr
md
Registered: 12-2007
Post Number: 249
Posted on Monday, September 06, 2010 - 4:05 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
Looking for a 39 mower deck for a 200 series. Thanks, Paul
Top of pagePrevious messageNext messageBottom of page Link to this message

douglas bruster
Member
Username: 44gun
Ia
Registered: 4-2009
Post Number: 12
Posted on Monday, September 06, 2010 - 3:49 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
looking for a engine driven hydraulic collection system for a 420 with a 60" deck. email or call 641 366 3435 or 641 691 8834(cell) I'm in Iowa. thanks Doug
Top of pagePrevious messageNext messageBottom of page Link to this message

Kyle F White
Member
Username: Fletch
IN
Registered: 9-2010
Post Number: 1
Posted on Monday, September 06, 2010 - 3:35 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
Want to buy A mule drive and necessary lifting linkages for a 31 tiller.... surprise surprise
Top of pagePrevious messageNext messageBottom of page Link to this message

William Broderick
Member
Username: W_broderick
NY
Registered: 6-2009
Post Number: 15
Posted on Monday, September 06, 2010 - 3:16 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
I am looking for a tech.and parts manuals for a425. A little rough ok as long as they are useable. call (518)279-3020 Thanks! Bill
Top of pagePrevious messageNext messageBottom of page Link to this message

Ralph VanHeyningen
Member
Username: Newkid318nmi
MI
Registered: 9-2010
Post Number: 1
Posted on Monday, September 06, 2010 - 9:05 am:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
I'm looking for a Hydraulic Tiller for a 318. I'm in lower Michigan, and can't travel more than about 2 hours for a meet or pickup.
Top of pagePrevious messageNext messageBottom of page Link to this message

Daniel Woodworth
Member
Username: Jetenginethrust
TX
Registered: 8-2010
Post Number: 4
Posted on Sunday, September 05, 2010 - 10:23 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
Looking for 420 rear diff serial number from 420 frames 475000 thru 220001 (1983 thru 1987) with ALL linkage. Also 420 wide rear wheels 12" x 10.5". I'm building a 420 from the frame up so I need alot of parts. Please email or call me Aerodynamicmech@aol.com
Daniel 210-838-4167
So far I have a frame S/N 315413 axle assembles,hydrostat trans,oil cooler,brake rods,lift straps,a few 318 hoses,hood hinges,wire harness minus headlight harness and taillight harness (still need those),power steering arm,battery tray,gas tank,gas shut off valve,hood latch,rockshaft,front wheels and plastic caps,belly cover,tail lights,headlight lens,seat with springs. Thank you-Daniel
Top of pagePrevious messageNext messageBottom of page Link to this message

Keith V
Member
Username: Echos67
Md
Registered: 9-2009
Post Number: 113
Posted on Sunday, September 05, 2010 - 6:55 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
I am looking for 3 items

1) Working with no leaks Hydraulic Cylinder for a Model 50 blower, I think this is the same cylinder used on the 54" Blades.

2) Working 1" electric pto to use on a Briggs Vanguard, I think the 317 uses a 1" pto. Mounting hole measurement needed also.

3) Complete tail light assemblies for a 318.

If you have one or all shoot me an email with condition, price, and a contact # please.

Thanks in advance
Keith
Top of pagePrevious messageNext messageBottom of page Link to this message

Scott F. Carmen
Member
Username: 73140h3232
NY
Registered: 7-2010
Post Number: 36
Posted on Sunday, September 05, 2010 - 5:13 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
I was surfing the gallery and I saw an AIR CLEANER / DUST BOWL combo that I would like to put on one of my 140's.
I have attached a photo from the gallery, I do not own this tractor and hope the owner does not mind me using it for illustration purposes only.


Thanks
Scott Carmen
Little falls, NY 13365

315-794-1377 cellcool air cleaner I am looking for
Top of pagePrevious messageNext messageBottom of page Link to this message

kenny jernigan
Member
Username: Kwj427
tn
Registered: 1-2007
Post Number: 414
Posted on Sunday, September 05, 2010 - 1:06 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
hi all,
i need a front wheel for a 60" deck for a 420-430.it is the smaller wheel.
thanks kenny

kwj427@yahoo.com
Top of pagePrevious messageNext messageBottom of page Link to this message

Dan Marchelle
Member
Username: Dmarchelle
NJ
Registered: 5-2004
Post Number: 323
Posted on Sunday, September 05, 2010 - 12:29 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
I'm looking for a set of engine side covers for a 314. Thanks, Dan. gungedefilth@yahoo.com
Top of pagePrevious messageNext messageBottom of page Link to this message

ronny sykes
Member
Username: 662termite467
ms
Registered: 8-2010
Post Number: 20
Posted on Sunday, September 05, 2010 - 12:17 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
Steven Shiery, These parts are still available from mother Deere
Top of pagePrevious messageNext messageBottom of page Link to this message

Bill Robinson
Member
Username: Jacsam
Va
Registered: 5-2006
Post Number: 952
Posted on Sunday, September 05, 2010 - 12:02 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
Scott, Jim's L&G Equipment, one of the sponsors here at the top of the page, sells them. $25.

Bill.
Top of pagePrevious messageNext messageBottom of page Link to this message

Scott F. Carmen
Member
Username: 73140h3232
NY
Registered: 7-2010
Post Number: 34
Posted on Sunday, September 05, 2010 - 8:41 am:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
I am in need of the bracket assembly to hold my rear Hydraulic outlets to my fender pan on my 70 140.
I need to finish the plumbing up for the upcoming Plow day in Brockport, NY

Thank you

Scott Carmen
Little Falls, NY 13365
application/octet-streammounting bracket for rear hydraulics
DSC00063 (Custom).JPE (50.1 k)
Top of pagePrevious messageNext messageBottom of page Link to this message

Derek
Member
Username: Gardenplower
Ga
Registered: 3-2010
Post Number: 11
Posted on Saturday, September 04, 2010 - 9:49 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
I am looking for a set of starter weights that I can use on my 318 or 330.
thanks,
Derek
Top of pagePrevious messageNext messageBottom of page Link to this message

stephen shiery
Member
Username: Sashiery
MO
Registered: 12-2006
Post Number: 1574
Posted on Saturday, September 04, 2010 - 9:27 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
I am looking for the steel part that goes under the fender deck on a 200-series that you bolt the seat springs on to. That's John Deere part number AM35130, and I also need the knob John Deere part number M48237. Anyone have decent ones?
Top of pagePrevious messageNext messageBottom of page Link to this message

Trapper_Chad
Member
Username: Trapper_chad
IN
Registered: 8-2010
Post Number: 5
Posted on Saturday, September 04, 2010 - 7:22 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
I am looking for a PTO knob for a manual pto 110
Top of pagePrevious messageNext messageBottom of page Link to this message

david thewes
Member
Username: Jdmaninlouky
ky
Registered: 8-2010
Post Number: 1
Posted on Saturday, September 04, 2010 - 5:13 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
My pleasure!
Top of pagePrevious messageNext messageBottom of page Link to this message

Lionel James Lambert
Member
Username: Lionlamb
KY
Registered: 4-2009
Post Number: 3
Posted on Saturday, September 04, 2010 - 2:24 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
I just wanted to publicly thank those that took the time to respond to my WTB post for the #43 blade to fit my 210. I bought one out of Louisville,KY. Thanks David.-Lionel Lambert
Top of pagePrevious messageNext messageBottom of page Link to this message

ronny sykes
Member
Username: 662termite467
ms
Registered: 8-2010
Post Number: 17
Posted on Saturday, September 04, 2010 - 10:55 am:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
Tom Bitterman, I have a complete electric clutch off a 210 that i think is around 1982-83
Top of pagePrevious messageNext messageBottom of page Link to this message

Joe Krupiak
Member
Username: Joeyivi
PA
Registered: 6-2010
Post Number: 2
Posted on Friday, September 03, 2010 - 11:19 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
I know this is a long shot any one have a cab for a 200 series they are willing to part with. hard or soft does not matter to me, I am in 10 miles from philly I would like to find something within a 3-4 hour drive shoot me a email JoeyIVI@hotmail.com thanks Joe
Top of pagePrevious messageNext messageBottom of page Link to this message

Tom Bitterman
Member
Username: Jdcrazy
WI
Registered: 11-2004
Post Number: 529
Posted on Friday, September 03, 2010 - 9:30 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
I am looking for an electric PTO, just the field winding for a 214 all other 20 series with electric PTO would work as well.

Thanks, Tom
Top of pagePrevious messageNext messageBottom of page Link to this message

Matt Vosika
Member
Username: Mattman
VA
Registered: 8-2010
Post Number: 1
Posted on Friday, September 03, 2010 - 2:15 pm:   Edit Post Delete Post View Post/Check IP    Move Post (Moderator/Admin Only)
Looking for a 54 blade for my 317. Close to North(west) Virginia.

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action:

Administration Administration Log Out Log Out   Previous Page Previous Page Next Page Next Page