| Author |
Message |
    
Shawn Marcus
Member
Username: Tractorboy60
MI
Registered: 1-2004
Post Number: 285
| | Posted on Friday, June 24, 2011 - 8:53 am: | 
|
The CX Gator I listed the other day is sold. Thanks for all the interest. |
Jeff Rolin
Member
Username: Jr11436
MN
Registered: 7-2008
Post Number: 15
| | Posted on Thursday, June 23, 2011 - 10:29 pm: |
|
Selling for my son-in-law, a non running 318 and a 50 inch deck. Governor went, broke a rod which damaged the piston skirt, but I can find no damage to crank or block. The machine has 1137 hours on it, and did use some oil, so am thinking it will need boring, and the crank polished or cut. The rest of the tractor is in good condition. It had a cab on it at one time, and has small bolt holes in fender deck. Needs a battery. I replaced the deck bearings a few years ago, but noticed slight play in the spindles when I checked them. The hinge for the chute will need replacing. 2 sets of blades included. Asking $500 for tractor, $400 for deck and mule drive, or $800 for both. I live in west central Minnesota near Alexandria. I don't have pictures ( no camera ) but can arrange for some if you need them. Tractor s/n is M00318X424930. Engine is a P218G |
Dave Delebreau
Member
Username: Jd_dave
WV
Registered: 10-2002
Post Number: 87
| | Posted on Thursday, June 23, 2011 - 10:25 pm: |
|
I have a set of new piston rings for a VH60 Tecumseh engine I received as part of a package deal recently. I'll give them to someone who needs them to rebuild their 60 lawn tractor. Just make a donation to WFM. I'll even pay postage! E-mail me. E-mail is in my profile. |
Phil Snyder
Member
Username: Pjdiesel
MD
Registered: 11-2010
Post Number: 4
| | Posted on Thursday, June 23, 2011 - 5:21 pm: |
|
Model 47 Blower for 318, 322, 332 (and others).
Pretty good condition, stored inside, shoes good, auger and fan good, edge good. Spins smoothly and throws nice.
Asking 1,300 . Located in North East, MD (Near SE PA and DE)
Phil 443-309-6030 |
Scott F. Carmen
Member
Username: 73140h3232
NY
Registered: 7-2010
Post Number: 165
| | Posted on Thursday, June 23, 2011 - 5:03 pm: |
|
Joeseph.......... you will make the MODS very upset you have not played by the rules,,,,,,no PRICES on your items for sale
repost before you get caught
HAHAHAHAH
Scott |
B.A. Babbitt
Member
Username: Bo2009
IN.
Registered: 11-2009
Post Number: 258
| | Posted on Thursday, June 23, 2011 - 3:16 pm: |
|
Joseph:
You're going to catch a lot of flak account
no prices asked, included\posted in your ads. Bobo |
John Criswell
Member
Username: Locab36
MI
Registered: 9-2010
Post Number: 40
| | Posted on Thursday, June 23, 2011 - 11:16 am: |
|
Model 33 Tiller, w/one extension, good tines and new belts. Comes w/the Lift Arm and depth cam also the PTO. Yep everything you need to start tilling. The PTO is for a late 140,300,314,316 Kohler and 317. Good unit I used last year to smooth out the yard after concrete driveway install. I can get pics just ask.
Price $500.00 for all of it.
Thanks
John in Midland, Michigan
[email protected] |
Charles Bell
Member
Username: Ccbchevy
MI
Registered: 6-2011
Post Number: 1
| | Posted on Thursday, June 23, 2011 - 9:21 am: |
|
For sale a 48 inch deck for a 720 tractor, the part number is JDSKU21693. This deck was only used for one year bought a 60 inch deck, its like brand new. Item cost 1300.00 new asking 600.00 or best offer. Located in Holly, Michigan
Chuck
[email protected]
248-914-0689
 |
Terry Reed
Moderator
Username: Treed
MO
Registered: 1-2002
Post Number: 3176
| | Posted on Thursday, June 23, 2011 - 6:24 am: |
|
1965 110. Runs good, but smokes - will need a ring job. Tractor is complete, has good front tires, and has the 10.50s on the rear that are in excellent shape. Includes a deck. The previous owner bought this tractor in pieces and he resurrected it and was going to restore it. He made some repairs on the hood and painted it, with mix results.
I'm selling this only because I want to focus on the square fender 110/112 and 200 series and maybe try and find a 140 or 300 series, so I need the room and the funds, so......
$400 obo, located in Bonne Terre, Mo (about 60 miles south of St. Louis) My email is in my profile or 6362085061. Can help with delivery for a small fee.
 |
Terry Reed
Moderator
Username: Treed
MO
Registered: 1-2002
Post Number: 3175
| | Posted on Thursday, June 23, 2011 - 6:16 am: |
|
The '67 112H that I listed on June 20 is spoken for, pending payment and transportation. |
Todd Gillfillan
Member
Username: Deereboy
OH
Registered: 12-2003
Post Number: 554
| | Posted on Wednesday, June 22, 2011 - 11:00 pm: |
|
Barn Cleaning Sale. All items located in Hamilton, OH, just north of Cincinnati. Can ship the smaller items, but pick up is preferred.
I'm only posting a few pictures of the more unusual items due to time and to save space. Email for any pictures you don't see.
Sleeve hitch lift bar for 110 flat fender sleeve hitch. $20
John Deere front fenders from the X475, X485, X495, X585, X595 series.From Deere, the set costs about $190. We are asking $80
Two rockshafts for open frame 300 series and 420/430. One has two small holes drilled on the side. They are hardly noticeable when installed on the tractor and do not affect functionality. $20
Brand new in the box 3 point hitch for open frame 300 series (318, 332, etc) and 420, 430. Box has not been opened. Ruegg charges $395 for his aftermarket kit. These are no longer available from John Deere. Our price is $450
Like new John Deere 3 point hitch for open frame 300 series (318, 332, etc) and 420, 430. Hitch is only 2-3 years old and only used a few times before the tractor was sold. $400
Draft links for 3 point hitch for 318 � 430. The hole for the lift links has been drilled to a larger size. $75 for the pair. These are $145 from Ruegg.
Front axle pivot including the PTO shaft that goes through it for a 420/430. $40
Front axle for 420/430 with 1� spindles. $100
430 frame extension. We bought it as new old stock from a local Deere dealer a few years ago, only used a few times. $175
430 pto extension. Only used a few times. This was bought new piece by piece from Deere a few years ago and only used a few times. $150
Complete set (top and bottom) of mounting brackets for a tilt dump collection system for a 318-430. The bottom brackets are the same as those used for the 3 point. $100 These are about $350 from Deere.
Front weight bracket and hood/grill guard for 430 made by Al Z. $150
John Deere front weight bracket for 318, 322, 332. $100
Just like new Redlandhill category 0 Handi Hitch. Price on their website is $139, you can have this one for $75
Rear end from a 332, includes rear axles, brakes, and differential. Everything worked fine when I took it out to put in a 420 differential and axles. Axle seals didn�t leak any oil. The black hose that connects to the transmission pump has a crack at the end that connects to the pump. Nothing else is wrong. $100 OBO
Brackets, pto shaft, and pulley to make a 47 blower fit a 318. With these brackets, you can make a 47 blower that currently fits a 420/430 fit a 318. These are original Deere parts. $175
Material collection system tilt dump � converted to fit on a 3 pt hitch and use the rear 2,000 rpm pto. It uses a pto shaft from a 48 tiller. We have the boot to fit a 50� mower and 60� mower. Worked fine last time we used it 2 years ago. $225 or make offer on pto shaft
Brinly category 0 cultivator. Good shape, painted JD green and black. Currently has category 1 pins on it. The center piece has a very slight bend in it but functionality is not affected. I have pictures to show the bend. $80
Not sure what this fits, but I think it might be a front lift for 345. $40. Just the bar is over $100 from Deere.
 |
Todd Gillfillan
Member
Username: Deereboy
OH
Registered: 12-2003
Post Number: 553
| | Posted on Wednesday, June 22, 2011 - 10:51 pm: |
|
Barn Cleaning Sale. All items located in Hamilton, OH, just north of Cincinnati. Can ship, but pick up is preferred.
One set of 8� front rims off a 318 with 1� spindles with 16x6.5x8 Carlisle Turf Saver tires. $40
One set of 8� front rims off a 322 with metric spindles with one good 16x6.5x8 Goodyear Terra Tire Soft Trac tire. The other tire has a slit and doesn�t hold air. $30
One set of 20x10x8 Kenda Super turf tires 4 ply, good shape. $40
One set of 18x8.5x8 Carlisle Turf Trac R/S 2 ply $30
One set of 23x10.5x12 Carlisle Super Lug on 7� rims, 4 ply. Tires hold air. $130
One set of 23x10.5x12 Goodyear Terra-tire soft trac 2 ply $30
One set of 23x10.5x12 Goodyear Super Terra grip 2 ply bar tires on 8.5� rims. Tires are in good shape. These are the original tires for a low hour 322. $150
|
Scott Graser
Member
Username: Telescott
Oh
Registered: 11-2008
Post Number: 357
| | Posted on Wednesday, June 22, 2011 - 9:55 pm: |
|
Complete transaxle from a 1966 110 round fender I posted HAS BEEN SPOKEN FOR. |
Mitchell Cain
Member
Username: Mcain
Indiana
Registered: 11-2010
Post Number: 29
| | Posted on Wednesday, June 22, 2011 - 9:48 pm: |
|
Price reduced on my 1974 John Deere Model 70$350.00 runs but need a carb kit deck is decent shape.
And the John Deere Model 60 $500.00 it runs sweet good deck.
Both tractors run but the batterys are shot.Can jump and you can ride and drive.
Can call my cell at 765-621-9677 Alexandria Indiana 46001
$350.00 On the 1974 Modle 70
$500 on the 1967 Modle 60 |
Joseph Moeller
Member
Username: Moelj9252
WI
Registered: 6-2011
Post Number: 1
| | Posted on Wednesday, June 22, 2011 - 8:58 pm: |
|
John Deere 420
60 in mower deck
2000 hrs
fresh paint
ready to mow
call russ 414-418-1162 |
Scott Graser
Member
Username: Telescott
Oh
Registered: 11-2008
Post Number: 355
| | Posted on Wednesday, June 22, 2011 - 7:57 pm: |
|
Complete transaxle from a 1966 110 round fender. I don�t know if it is good, if you turn one wheel the other turns the other way. When we loaded it up the same thing happened as it rolled on the trailer. I don�t know if this is normal or not.
THIS ITEM IS FREE (donate a little to the WWF group if you don�t mind).
I do not want to ship; I am in North Central (Lexington) Ohio. Zipcode 44904
We could meet somewhere if it isn�t too far for lunch and a meet and shoot the bull session. 419-564-4983
If anyone could use any springs, linkage or tie rods from this tractor let me know. I figure $5 each piece + shipping is fair.
|
phil mcmartin
Member
Username: Phil_mcmartin
ia
Registered: 6-2007
Post Number: 112
| | Posted on Wednesday, June 22, 2011 - 4:43 pm: |
|
John Deere 60 inch deck off of a 420. Price $600. Phone 402-490-2168. Phil McMartin. Oakland, Ia. 51560. |
Shawn Marcus
Member
Username: Tractorboy60
MI
Registered: 1-2004
Post Number: 284
| | Posted on Wednesday, June 22, 2011 - 4:23 pm: |
|
2008 John Deere CX Gator, Canopy, windshield brake/taillights, horn, floormats, bedmat, grille guard, cupholder, nice condition.
700 Hours
$3,800
[email protected]
I've been getting a lot of interest locally so if your interested, don't wait too long. |
Shawn Marcus
Member
Username: Tractorboy60
MI
Registered: 1-2004
Post Number: 283
| | Posted on Wednesday, June 22, 2011 - 4:12 pm: |
|
This is some of my personal stuff we have forsale currently:
1967 John Deere 112, repainted at one time (all new decals, etc.), good runner at that time but hasn't been run in a while, comes with a mower deck. $700
1974 John Deere 70, mower deck, front blade, Original HD Tires, has a custom front bumper on it so the hood never needed to be repaired, repainted (with new decals, etc.). Nice looking machine. $700
1969 John Deere 60, mower deck, also repainted, good runner...$600
John Deere 36 Snowblower (for round fenders). We bought it, tried it once (works) and then it's been stored since. Original/average condition. $200
This is just a start. There are more pieces to come. Please e-mail me and I can send you pictures:
[email protected] |
Cory Graslie
Member
Username: Coryg
MO
Registered: 5-2010
Post Number: 84
| | Posted on Wednesday, June 22, 2011 - 4:10 pm: |
|
The Brinly disc that I listed yesterday has been sold locally. |
Shawn Marcus
Member
Username: Tractorboy60
MI
Registered: 1-2004
Post Number: 282
| | Posted on Wednesday, June 22, 2011 - 4:02 pm: |
|
I took in a John Deere 400 the other day at the dealership with a bunch of attachments, here is a list of everything I have available:
John Deere 400, rough looking, new Kohler engine 2 years ago, runs, includes 60" deck $1,200
John Deere model 50 snowblower, appears to be in pretty nice shape, customer said gear box was torn apart when they bought it and it's never been put back together, so it hasn't been used much, appears complete $150
Cab, Same as blower...hasn't been used in quite some time, nice shape $500
Tire chains for 26x12-12 tires (I won't sell until after the blower has sold) $45
Cat 0 3pt hitch cultivator, decent shape, painted yellow $250
Cat 0 3pt single gang disk, Brinly white $250
Cat 0 3pt A-frame to use sleeve hitch attachments $250
All this stuff is located in Lake City, Michigan. I can send you pictures through e-mail (my computer at work won't resize). I think these are pretty reasonable prices so all prices are firm unless you can buy multiple pieces. Thanks
[email protected] |
Cory Graslie
Member
Username: Coryg
MO
Registered: 5-2010
Post Number: 83
| | Posted on Wednesday, June 22, 2011 - 10:02 am: |
|
The sleeve hitch adapter that I listed yesterday has been sold. Thanks. |
Bob Colebank
Member
Username: Rco2120
MN
Registered: 1-2008
Post Number: 23
| | Posted on Wednesday, June 22, 2011 - 12:26 am: |
|
FOR SALE:
Nice clean JD 48" rear tiller for 318/420/430 tractors. Complete with driveshaft. Good shape all around...
Price $1175, located near Mpls, MN;
also have available a Cat 0 3 point hitch and rear 2000 rpm PTO which are required to use above tiller; Will sell all three items as package for $2000 total. Email in profile....
(Message edited by treed on June 22, 2011) |
brian freeman
Member
Username: Motorcarm19
ia
Registered: 12-2009
Post Number: 21
| | Posted on Wednesday, June 22, 2011 - 12:05 am: |
|
I have the following items to move so I can finish other JD projects A rear pto clutch and a two pully bracket for the hydro tiller or the mcs this is off the 318 - 420 family of tractors $400.00 A 48in deck from a 317 should fit others, spindles and deck look good. have not painted it so you can see what you get. $300.00. One John Deere 112 with an fo31h tiller with both extensions. Selling as a unit $750.00 A go50l snow thrower That fits both 400 and 420 tractors $ 700.00 One JD 317 parts tractor, The motor is shot but just about every thing else is sill there $350.00 A water filled aerator (24 gal) 36in wide $ 150.00 I have photos on request and am willing to trade for items for a 420 This Email or 515 240 9518 Thanks Brian |
Matt
Member
Username: Harbertm
IA
Registered: 12-2008
Post Number: 938
| | Posted on Tuesday, June 21, 2011 - 11:23 pm: |
|
Deluxe Suspension Kit
This is the best accessory you can purchase for your tractor. Modeled after JD's 430 flip suspension seat but redesigned for serviceability, more (or same) leg room, and superior finish this is a seat suspension better than Deere ever manufactured!
Designed by fellow WFM-er Colin Hart, laser cut for precision, powder coated for durability this is a quality product that will last the test of time! No cut chop and rebuild required to replace worn bushings. Truthfully I would never own a tractor without a suspension after owning one. Save your neck and back and love hours of enjoyment on your machine! Only 3 remaining!!!
Video of the product can be viewed here - http://www.youtube.com/watch?v=21jLwt8KdXo
Email an phone number are in my profile.. Shipping is free US Domestic via UPS Ground (no PO Box) |
Matt
Member
Username: Harbertm
IA
Registered: 12-2008
Post Number: 937
| | Posted on Tuesday, June 21, 2011 - 11:03 pm: |
|
Making room for the new machine! All prices plus shipping.. located in Ankeny Iowa.. If you think I'm out of line with pricing, please let me know!
*most parts for 318/420/430's.. I used part numbers were possible, please research to make sure it will work with your model. prefer fast payment.. Going to the quad cities Later this week and would be willing to transport bigger items if you meet me along my route on my timeline...
Please use email in my profile.
420 grille... I bought two on accident ($95 value) will need madialion affixed.
Spare Madiallion (NO BACKING FROM DEERE)
318 Carb and intake (B43G ONAN)
430 front PTO extension.. (could use a new bearing.. save $50 and do it yourself!)
430 frame extension
54- 4 way blade for 420/430's $425
110-112 RF primary belt
112 RF Secondary belt
Onan air filter
Firestone 23 degree flotation ( REAL FIRESTONES!!) 26x12x12 - heavy duty solid center rims- Rimguard used ~40 hours used.. MOST traction, BEST TIRE!!!! Only selling because I will have a 4x4 and will keep my matching spoke SE Rims..
seat springs
Fuel line pickups (pair)
h3 valve linkage pin
headlight switch nut
oil pan - starter B43g
Onan air filter assembly
Starter improvement kit
LED Tail lights... AWESOME!
Steering wheel cap.. PLEASE NOTE Both Bazels are LEFT... also Only one metal retainer included
|
jay b kipfer
Member
Username: Jaybk
mn
Registered: 10-2008
Post Number: 62
| | Posted on Tuesday, June 21, 2011 - 10:52 pm: |
|
For Sale: 1964 John Deere 110 RF, Serial# 3771, Complete, Mower Deck included. Runs good but smokes. $ 450 Cash.. Call 507-822-2490
|
Brad Schumacher
Member
Username: Olddeeres17
Oh
Registered: 11-2007
Post Number: 252
| | Posted on Tuesday, June 21, 2011 - 9:22 pm: |
|
Complete NOS Starter Kit for John Deere 56-57 Riding Mower. Comes in the original box and has the installation instructions, More pictures if interested, Complete kit, $50 plus shipping
|
ed ciecwisz ( jenkatewened - EddC )
Member
Username: Jenkatewened
Nj
Registered: 7-2003
Post Number: 666
| | Posted on Tuesday, June 21, 2011 - 9:14 pm: |
|
Original Deere 316/330 Technical Information manual - TM-1324 (JUN 86) - Comes in the original Deere 4 D-ring binder...$65 shipped.
Emails to [email protected] |
Closed: New threads not accepted on this page
